JDB-P Solid lubricant bimetal strip is made of bimetal strip base with solid lubricant inlaid. This type of wear plates reduce the static and dynamic friction coefficients difference. This material can work stably even under the micro movement condition. Depending on request, oil deposits or grooves could be designed on the bearing surface to hold oil or grease or any possible containments

Standard material: Steel+CuSn10Pb10+Solid Lubricants

Other customized material can be made based on customer’s requirement.

All standard wear plates sizes are available.

oil deposits or grooves could be designed

• This type of bimetal solid lubricants wear plates are suitable for using under middle to low load conditions. It has low friction coefficient and good wear resistance. Light oil lubricating is recommended and periodically oiling helps to improve the bearing duration.
• The typical applications of this material include the hydro turbine, plastic injection machine guide bushings, tyre mold and other wear plates and sliding bearings.

• Copper alloy material: CuSnPb+C

• Max operating temperature: 300℃

• Max load pressure: 150N/mm²

• Friction Coef. μ: 0.05-0.18